Types of Water Conduit and Their Lifespan

No matter what kind of pipe you have in your house, it will eventually need to be updated. It’s crucial to monitor your home’s water systems. The primary motive for doing this would be to stop leaks from becoming a disaster. These can seriously harm the home, especially if they happen at night and go unnoticed. Flakes or pipework in the water, as well as minor leaks that, over time, develop mildew and damage, are other potential problems. Going through the house and inspecting all the exposed pipes is the most efficient technique to check for pipe damage.

Cracks, mould, warping, and peeling are a few common indicators that something is wrong. You can tell you have a problem if anything about the piping material seems out of the ordinary. However, different materials exhibit various indications. Don’t forget to look around the toilets and under sinks as well. Although it is simple and cost-free to do a general check like this, other problems can be more challenging to identify without a skilled eye. Providing high-quality water conduits requires the expertise of pipe manufacturers in Kerala or other parts of the world.

Depending on the type of piping you have, everyone’s plumbing is unique. There are many various types of piping materials available, and each has a distinct lifespan. Here is all the information you need to know about the lifespan of the most popular types of pipes.

Types Of Pipes


Due to oxidation, copper pipes are typically greenish in colour and have the appearance of pennies. Although these pipes have a relatively long lifespan, depending on a number of conditions, they can occasionally become corroded. Since the corrosion’s vivid green colour stands out so sharply against the pipe’s metal, it is simple to see. Small quantities of corrosion are typical, but if you notice significant amounts, you may wish to monitor that pipe segment or hire a plumber.


Polybutylene, which should not be confused with polyvinyl chloride, is incredibly brittle. Between the 1970s and 1990s, this kind of piping was in use. Chlorinated water, which is frequently used in municipal water supply systems, causes these to begin disintegrating from the inside out, which results in piping fragments in your water and makes it difficult to predict when the pipes will finally collapse.


PVC pipes have a very long lifespan and very few problems. Most PVC piping has a life expectancy of at least 75 years, although this does not account for leaks brought on by external sources. There are a variety of factors that could lead to leaks in the future, including pressure in the pipes or on the pipes, minor natural movements in the home that could put stress on the joints, or a badly constructed joint that could eventually leak.


Pipes made of galvanised steel or iron are typically only found in houses built before 1950. Galvanised pipes are known to deteriorate from the inside out and have an exterior appearance of dark grey or black. Water becomes tarnished and flakes as a result. They need to be replaced because they only last 20 to 50 years. They provide a risk for water contamination and are a concern for many insurance providers, which could have an impact on premium estimates.


Copper has now replaced brass pipe, which was once extremely similar to copper in appearance. Although the majority of installations that employ brass pipes are now rather old and should be constantly inspected to prevent mishaps, brass pipes also have a life expectancy of over 50 years. Since brass pipe is less flexible than copper and does not corrode, it is harder to detect symptoms of stress unless there is an obvious leak.


PEX refers to a practical plastic tubing that is typically used for water supply lines. It prevents corrosion or erosion from seeping into the water, similar to PVC piping. Since PEX pipes are flexible and easy to weave through walls, roofs, and unfinished plumbing spaces, experts continue to be drawn to them. They are also strong enough to withstand the pressure from your water supply. Additionally, it is colour-coded for hot and cold water, making it easy to discern and arrange while at work.


ABS piping, a kind of plastic piping comparable to PVC and identifiable by its dark colour, is made of acrylonitrile butadiene styrene (ABS). ABS is only used for drain and waste piping and is renowned for its extended durability.


Water distribution systems still use cast iron plumbing pipes because of their extraordinary durability. Cast-iron pipes were frequently used in drainage systems and sewer lines. They are attractive because they are heat resistant and reduce the sound of moving water. Cast-iron pipe, however, is vulnerable to corrosion and rust. Over time, this will affect its capacity to keep up a clean water supply. These kinds of pipes have largely been replaced in house plumbing repairs by copper or PEX pipes.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button